توضیحات
نخ دندان دسته دار مینا مدل ویسل اکالیپتوس
نخ دندان دسته دار مینا مدل ویسل اکالیپتوس
نخ دندان مینا ویسل. یک وسیله U شکل دارای بدنهای ارگونومیک و دو بازوی جدا است که در یک سمت بدنه قرار دارند و انتهای هر 2 بازو آزاد است. شکل بازوها در این وسیله طوری طراحی شده است که نسبت به بدنه دارای مقداری انحنا هستند؛ به نحوی که در انتهای بازوها تقریبا زاویه 90 درجه با بدنه تشکیل میدهند که در هنگام نخ دندان کشیدن، کاملا مناسب و کاربردی است. ویژگی نخ دندان دسته دار مینا مدل ویسل اکالیپتوس_ استفاده آسان و راحت _ مقرون به صرفه _ طول 40 متر _ تشکیل شده از نخ پلی آمید، موم زنبور عسل _ حاوی اتانول 96 % و فلوراید
نحوه استفاده:
. . . . Mina – Whistle FlossMina Whistle tooth. floss. A U-shaped device has an ergonomic. body and two separate arms that are on one side of the body and the ends of both arms are free. The shape of the arms is designed to have some curvature to the body so that the ends of the arms are approximately. 90 degrees to the body, which is perfectly appropriate when applied to the teeth.
Characteristics. of enameled tooth model Wissel Eucalyptus
_ Easy and convenient to use
_ Affordable
_ Length 40 meters
_ Made of polyamide yarn, beeswax
_ Contains 96% ethanol and fluoride
How to use:Mina Wiesel’s floss is taken out of the box. Grab some of the floss that came out of the green chamber. Pull about 3 cm from the yarn, wrap the yarn around the protruding fungus overhang that lies on the body three times.
It should be noted that the yarn is reasonably tight. Reject the extension of the thread from the two ends of the two retaining arms and from the groove inserted at the tip so that the thread is sufficiently firm. The yarn should continue downward to the fungal protuberance and wrap around it again three times.
The remainder of the yarn was cut by a razor blade. Now the enamel tooth floss is ready to use. Just hold the enamel toothbrush body and hold the retaining arms into the mouth.
He inserted a piece of thread between the two retaining arms between the two teeth. It is enough to move Mina Wiesel to the left and right and put a little pressure on the gum.
The rest of the work is like the usual thread. The yarn should move between the teeth with the left and right movements. The same should be done for the rear teeth. You’ll see how easy it is for the rear teeth to be pulled. If the thickness of the tooth is low, the yarn can be wrapped one further around the retaining arm. To do this, simply remove the 5cm from the yarn instead of the 5cm, and after you have completed step 1, re-thread the yarn again as in the first step to double the thickness of the yarn between the arms. If you need more thickness, the previous step can be repeated.
|
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.